Skip to main content

Initialisation & configuration basique

Notes pré installation :

Les câbles console de chez Cisco fonctionne très bien.

Baud RateData BitsParityStop BitsFlow Control
96008None1Off

Configuration via GUI quick config


Aruba-1.png

Aruba-2.png

La mise en page sous IE est étrange, mais l'important est de pouvoir la valider la configuration basique.
Aruba-3.png

Casser le staking présent par défaut

(ArubaS2500-24P) (config) #show interface brief

Interface Admin Link Line Protocol Speed/Duplex
--------- ----- ---- ------------- ------------
GE0/0/0 Enable Up Up 1 Gbps / Full
GE0/0/1 Enable Down Down N/A
GE0/0/2 Enable Up Up 100 Mbps / Full
GE0/0/3 Enable Down Down N/A
GE0/0/4 Enable Up Up 100 Mbps / Full
GE0/0/5 Enable Down Down N/A
GE0/0/6 Enable Up Up 100 Mbps / Full
GE0/0/7 Enable Down Down N/A
GE0/0/8 Enable Up Up 100 Mbps / Full
GE0/0/9 Enable Down Down N/A
GE0/0/10 Enable Down Down N/A
GE0/0/11 Enable Down Down N/A
GE0/0/12 Enable Down Down N/A
GE0/0/13 Enable Down Down N/A
GE0/0/14 Enable Down Down N/A
GE0/0/15 Enable Down Down N/A
GE0/0/16 Enable Down Down N/A
GE0/0/17 Enable Down Down N/A
GE0/0/18 Enable Down Down N/A
GE0/0/19 Enable Down Down N/A
GE0/0/20 Enable Down Down N/A
GE0/0/21 Enable Down Down N/A
GE0/0/22 Enable Down Down N/A
GE0/0/23 Enable Down Down N/A
GE0/1/0 Enable Down Down N/A
GE0/1/1 Enable Down Down N/A
MGMT Enable Down Down N/A

(ArubaS2500-24P) (config) # show stacking interface

stack1/2
--------
stack1/2 is administratively Enabled, link is Down, line protocol is Down
Speed: N/A, MTU: 9224 bytes, Link flaps: 0
Last update of counters: 0d 00:00:00 ago
Last clearing of counters: 0d 00:00:00 ago
Link status last changed: 0d 00:00:00 ago
Statistics:
Received 0 frames, 0 octets
0 pps, 0 bps
0 broadcasts, 0 runts, 0 giants, 0 throttles
0 error octets, 0 CRC frames
0 multicast, 0 unicast
Transmitted 0 frames, 0 octets
0 pps, 0 bps
0 broadcasts, 0 throttles
0 multicast, 0 unicast
0 errors octets, 0 deferred
0 collisions, 0 late collisions

stack1/3
--------
stack1/3 is administratively Enabled, link is Down, line protocol is Down
Speed: N/A, MTU: 9224 bytes, Link flaps: 0
Last update of counters: 0d 00:00:00 ago
Last clearing of counters: 0d 00:00:00 ago
Link status last changed: 0d 08:13:09 ago
Statistics:
Received 0 frames, 0 octets
0 pps, 0 bps
0 broadcasts, 0 runts, 0 giants, 0 throttles
0 error octets, 0 CRC frames
0 multicast, 0 unicast
Transmitted 0 frames, 0 octets
0 pps, 0 bps
0 broadcasts, 0 throttles
0 multicast, 0 unicast
0 errors octets, 0 deferred
0 collisions, 0 late collisions

(ArubaS2500-24P) (config) # delete stacking interface stack 1/2
(ArubaS2500-24P) (config) # delete stacking interface stack 1/3
(ArubaS2500-24P) (config) #show interface brief

Interface Admin Link Line Protocol Speed/Duplex
--------- ----- ---- ------------- ------------
GE0/0/0 Enable Up Up 1 Gbps / Full
GE0/0/1 Enable Down Down N/A
GE0/0/2 Enable Up Up 100 Mbps / Full
GE0/0/3 Enable Down Down N/A
GE0/0/4 Enable Up Up 100 Mbps / Full
GE0/0/5 Enable Down Down N/A
GE0/0/6 Enable Up Up 100 Mbps / Full
GE0/0/7 Enable Down Down N/A
GE0/0/8 Enable Up Up 100 Mbps / Full
GE0/0/9 Enable Down Down N/A
GE0/0/10 Enable Down Down N/A
GE0/0/11 Enable Down Down N/A
GE0/0/12 Enable Down Down N/A
GE0/0/13 Enable Down Down N/A
GE0/0/14 Enable Down Down N/A
GE0/0/15 Enable Down Down N/A
GE0/0/16 Enable Down Down N/A
GE0/0/17 Enable Down Down N/A
GE0/0/18 Enable Down Down N/A
GE0/0/19 Enable Down Down N/A
GE0/0/20 Enable Down Down N/A
GE0/0/21 Enable Down Down N/A
GE0/0/22 Enable Down Down N/A
GE0/0/23 Enable Down Down N/A
GE0/1/0 Enable Down Down N/A
GE0/1/1 Enable Down Down N/A
GE0/1/2 Enable Down Down N/A
GE0/1/3 Enable Down Down N/A
MGMT Enable Down Down N/A

Ajout d'un utilisateur

(ArubaS2500-24P) (config) #mgmt-user ?

<username> Name of the user (maximum 16 characters).
localauth-disable Disable Local authentication event if RADIUS
authentication timeout.
password-recovery-dis.. Disable recovery login
ssh-pubkey SSH login of management users by public key
authentication
webui-cacert CA Certificate used to sign management user's
certificate

(ArubaS2500-24P) (config) #mgmt-user nida ?

<rolename> Role name from one of the following:
root - super user role
guest-provisioning - guest provisioning role
network-operations - Network operator role
read-only - Read only role
location-api-mgmt - Location API Management Role

(ArubaS2500-24P) (config) #mgmt-user nida root
Password:***********
Re-Type password:**********

(ArubaS2500-24P) (config) #show mgmt-user

Management User Table
---------------------
USER PASSWD ROLE STATUS
---- ------ ---- ------
admin ***** root ACTIVE
nida ***** root ACTIVE

Jumbo Frames

(ArubaS2500-24P) (config) #show interface gigabitethernet 0/0/0

GE0/0/0 is administratively Up, Link is Up, Line protocol is Upq
Hardware is Gigabit Ethernet, Interface is GE0/0/0, Address is 00:0b:86:aa:a6:c2
Encapsulation ARPA, Loopback not set
Configured: duplex (Auto), Speed (Auto), FC (Off), Autoneg (On)
Negotiated: duplex (Full), Speed (1 Gbps)
Interface index: 1
MTU 1514 bytes

(ArubaS2500-24P) (config) #interface gigabitethernet 0/0/0
(ArubaS2500-24P) (gigabitethernet "0/0/0") #mtu ?

<mtu> Set MTU on interface between 64 and 9216

(ArubaS2500-24P) (gigabitethernet "0/0/0") #mtu 9216

(ArubaS2500-24P) (config) #show interface gigabitethernet 0/0/0

GE0/0/0 is administratively Up, Link is Up, Line protocol is Up
Hardware is Gigabit Ethernet, Interface is GE0/0/0, Address is 00:0b:86:aa:a6:c2
Encapsulation ARPA, Loopback not set
Configured: duplex (Auto), Speed (Auto), FC (Off), Autoneg (On)
Negotiated: duplex (Full), Speed (1 Gbps)
Interface index: 1
MTU 9216 bytes

 

Configuration SNMP v2

(ArubaS2500-24P) (config) #show snmp community

SNMP COMMUNITIES
----------------
COMMUNITY ACCESS VERSION
--------- ------ -------
Zer0t0uchpr0visi0ning READ_ONLY V1, V2C

(ArubaS2500-24P) (config) #hostname ArubaS2500-24P
(ArubaS2500-24P) (config) #syscontact monitoring
(ArubaS2500-24P) (config) #syslocation France
(ArubaS2500-24P) (config) #snmp-server community public
(ArubaS2500-24P) (config) #snmp-server enable trap
(ArubaS2500-24P) (config) #snmp-server host
192.168.1.205 community public
(ArubaS2500-24P) (config) #snmp-server engine-id ?

<engineid>      Engine ID of SNMP server in HEX (10-64 chars) eg.
                         800039e703000b86112233

(ArubaS2500-24P) (config) #snmp-server engine-id 800039e703000b86112233

Configuration SNMP v3