Initialisation & configuration basique

Notes pré installation :

Les câbles console de chez Cisco fonctionne très bien.

Configuration via GUI quick config

La mise en page sous IE est étrange, mais l'important est de pouvoir la valider la configuration basique.

Casser le staking présent par défaut

(ArubaS2500-24P) (config) #show interface brief

Interface Admin Link Line Protocol Speed/Duplex
--------- ----- ---- ------------- ------------
GE0/0/0 Enable Up Up 1 Gbps / Full
GE0/0/1 Enable Down Down N/A
GE0/0/2 Enable Up Up 100 Mbps / Full
GE0/0/3 Enable Down Down N/A
GE0/0/4 Enable Up Up 100 Mbps / Full
GE0/0/5 Enable Down Down N/A
GE0/0/6 Enable Up Up 100 Mbps / Full
GE0/0/7 Enable Down Down N/A
GE0/0/8 Enable Up Up 100 Mbps / Full
GE0/0/9 Enable Down Down N/A
GE0/0/10 Enable Down Down N/A
GE0/0/11 Enable Down Down N/A
GE0/0/12 Enable Down Down N/A
GE0/0/13 Enable Down Down N/A
GE0/0/14 Enable Down Down N/A
GE0/0/15 Enable Down Down N/A
GE0/0/16 Enable Down Down N/A
GE0/0/17 Enable Down Down N/A
GE0/0/18 Enable Down Down N/A
GE0/0/19 Enable Down Down N/A
GE0/0/20 Enable Down Down N/A
GE0/0/21 Enable Down Down N/A
GE0/0/22 Enable Down Down N/A
GE0/0/23 Enable Down Down N/A
GE0/1/0 Enable Down Down N/A
GE0/1/1 Enable Down Down N/A
MGMT Enable Down Down N/A

(ArubaS2500-24P) (config) # show stacking interface

stack1/2
--------
stack1/2 is administratively Enabled, link is Down, line protocol is Down
Speed: N/A, MTU: 9224 bytes, Link flaps: 0
Last update of counters: 0d 00:00:00 ago
Last clearing of counters: 0d 00:00:00 ago
Link status last changed: 0d 00:00:00 ago
Statistics:
Received 0 frames, 0 octets
0 pps, 0 bps
0 broadcasts, 0 runts, 0 giants, 0 throttles
0 error octets, 0 CRC frames
0 multicast, 0 unicast
Transmitted 0 frames, 0 octets
0 pps, 0 bps
0 broadcasts, 0 throttles
0 multicast, 0 unicast
0 errors octets, 0 deferred
0 collisions, 0 late collisions

stack1/3
--------
stack1/3 is administratively Enabled, link is Down, line protocol is Down
Speed: N/A, MTU: 9224 bytes, Link flaps: 0
Last update of counters: 0d 00:00:00 ago
Last clearing of counters: 0d 00:00:00 ago
Link status last changed: 0d 08:13:09 ago
Statistics:
Received 0 frames, 0 octets
0 pps, 0 bps
0 broadcasts, 0 runts, 0 giants, 0 throttles
0 error octets, 0 CRC frames
0 multicast, 0 unicast
Transmitted 0 frames, 0 octets
0 pps, 0 bps
0 broadcasts, 0 throttles
0 multicast, 0 unicast
0 errors octets, 0 deferred
0 collisions, 0 late collisions

(ArubaS2500-24P) (config) # delete stacking interface stack 1/2
(ArubaS2500-24P) (config) # delete stacking interface stack 1/3
(ArubaS2500-24P) (config) #show interface brief

Interface Admin Link Line Protocol Speed/Duplex
--------- ----- ---- ------------- ------------
GE0/0/0 Enable Up Up 1 Gbps / Full
GE0/0/1 Enable Down Down N/A
GE0/0/2 Enable Up Up 100 Mbps / Full
GE0/0/3 Enable Down Down N/A
GE0/0/4 Enable Up Up 100 Mbps / Full
GE0/0/5 Enable Down Down N/A
GE0/0/6 Enable Up Up 100 Mbps / Full
GE0/0/7 Enable Down Down N/A
GE0/0/8 Enable Up Up 100 Mbps / Full
GE0/0/9 Enable Down Down N/A
GE0/0/10 Enable Down Down N/A
GE0/0/11 Enable Down Down N/A
GE0/0/12 Enable Down Down N/A
GE0/0/13 Enable Down Down N/A
GE0/0/14 Enable Down Down N/A
GE0/0/15 Enable Down Down N/A
GE0/0/16 Enable Down Down N/A
GE0/0/17 Enable Down Down N/A
GE0/0/18 Enable Down Down N/A
GE0/0/19 Enable Down Down N/A
GE0/0/20 Enable Down Down N/A
GE0/0/21 Enable Down Down N/A
GE0/0/22 Enable Down Down N/A
GE0/0/23 Enable Down Down N/A
GE0/1/0 Enable Down Down N/A
GE0/1/1 Enable Down Down N/A
GE0/1/2 Enable Down Down N/A
GE0/1/3 Enable Down Down N/A
MGMT Enable Down Down N/A

Ajout d'un utilisateur

(ArubaS2500-24P) (config) #mgmt-user ?

<username> Name of the user (maximum 16 characters).
localauth-disable Disable Local authentication event if RADIUS
authentication timeout.
password-recovery-dis.. Disable recovery login
ssh-pubkey SSH login of management users by public key
authentication
webui-cacert CA Certificate used to sign management user's
certificate

(ArubaS2500-24P) (config) #mgmt-user nida ?

<rolename> Role name from one of the following:
root - super user role
guest-provisioning - guest provisioning role
network-operations - Network operator role
read-only - Read only role
location-api-mgmt - Location API Management Role

(ArubaS2500-24P) (config) #mgmt-user nida root
Password:***********
Re-Type password:**********

(ArubaS2500-24P) (config) #show mgmt-user

Management User Table
---------------------
USER PASSWD ROLE STATUS
---- ------ ---- ------
admin ***** root ACTIVE
nida ***** root ACTIVE

Jumbo Frames

(ArubaS2500-24P) (config) #show interface gigabitethernet 0/0/0

GE0/0/0 is administratively Up, Link is Up, Line protocol is Upq
Hardware is Gigabit Ethernet, Interface is GE0/0/0, Address is 00:0b:86:aa:a6:c2
Encapsulation ARPA, Loopback not set
Configured: duplex (Auto), Speed (Auto), FC (Off), Autoneg (On)
Negotiated: duplex (Full), Speed (1 Gbps)
Interface index: 1
MTU 1514 bytes

(ArubaS2500-24P) (config) #interface gigabitethernet 0/0/0
(ArubaS2500-24P) (gigabitethernet "0/0/0") #mtu ?

<mtu> Set MTU on interface between 64 and 9216

(ArubaS2500-24P) (gigabitethernet "0/0/0") #mtu 9216

(ArubaS2500-24P) (config) #show interface gigabitethernet 0/0/0

GE0/0/0 is administratively Up, Link is Up, Line protocol is Up
Hardware is Gigabit Ethernet, Interface is GE0/0/0, Address is 00:0b:86:aa:a6:c2
Encapsulation ARPA, Loopback not set
Configured: duplex (Auto), Speed (Auto), FC (Off), Autoneg (On)
Negotiated: duplex (Full), Speed (1 Gbps)
Interface index: 1
MTU 9216 bytes

 

Configuration SNMP v2

(ArubaS2500-24P) (config) #show snmp community

SNMP COMMUNITIES
----------------
COMMUNITY ACCESS VERSION
--------- ------ -------
Zer0t0uchpr0visi0ning READ_ONLY V1, V2C

(ArubaS2500-24P) (config) #hostname ArubaS2500-24P
(ArubaS2500-24P) (config) #syscontact monitoring
(ArubaS2500-24P) (config) #syslocation France
(ArubaS2500-24P) (config) #snmp-server community public
(ArubaS2500-24P) (config) #snmp-server enable trap
(ArubaS2500-24P) (config) #snmp-server host 192.168.1.205 community public
(ArubaS2500-24P) (config) #snmp-server engine-id ?

<engineid>      Engine ID of SNMP server in HEX (10-64 chars) eg.
                         800039e703000b86112233

(ArubaS2500-24P) (config) #snmp-server engine-id 800039e703000b86112233

Configuration SNMP v3